0	SID Receiver overview

0

Synoptic

1	Printed Circuit Board

A small quantity of high quality printed circuits boards for the SID receiver have been manufactured.
The author offers those boards for 30 euros plus shipping costs.
Please contact me for availability.

The printed circuit board is out of stock. Production of another batch is not planned.

Here is a picture of the board:

0

Tuning

1

Assembly

Last step is to put the PCB in a metallic box with the transformer, fuse and power switch.
See the pictures here below for assembly example:

1	Data Transfer Protocol

Here are some details regarding the data transfer protocol between the MAX187 and the RS-232 interface.

The MAX187 signals are connected to the following RS-232 pins:

• /CS ↔ RTS
• SCLK ↔ DTR
• DSR ↔ DOUT

The RS-232 standard defines the positive voltage levels for logic one and negative voltage level for logic zero.

Protocol is detailed in the following documents:

•  MAX187 Datasheet
•  Maxim application note 827. This note contains a C code example.

The overall sequence is described below:

• Unset RTS (RTS=-5V; /CS='1') to deselect MAX187
• Set DTR (DTR=+5V; SCLK='0')
• Set RTS (RTS=+5V; /CS='0') to select MAX187. This starts the conversion.
• Wait till the conversion is done (DOUT must be '1'; DSR=-5V)
• Clock in 12 bits. MSB are first:
  • Unset DTR (DTR=-5V; SCLK='1')
  • Set DTR (DTR=+5V; SCLK='0')
  • Read a bit (signal DOUT, DSR)
• Add a 13^th falling edge:
  • Unset DTR (DTR=-5V; SCLK='1')
  • Set DTR (DTR=+5V; SCLK='0')
• Unset RTS (RTS=-5V; /CS='1') to deselect MAX187
• Unset DTR (DTR=-5V; SCLK='1')